Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Not wrapped. Not covered. Solid pine wood, stained to your spec and sealed with a protective topcoat that lets every grain tell its own story. Inspired by boutique amp cabinets and vintage guitar bodies — the Tonewood Series is a rack case that looks like a piece of furniture and performs like a road case.
The Tonewood Story
Where Craft Meets Character
The Tonewood Series is a celebration of raw wood beauty and sonic heritage. While every other rack case hides behind Tolex, the Tonewood lets the material speak for itself — solid pine construction, precision joinery, smooth-edge chamfers, and a hand-applied stain and topcoat finish that brings out every grain, every knot, every detail that makes solid wood irreplaceable.
From deep Dark Walnut to warm Cherry to rich Ebony — or a custom stain matched to your guitar, your amp, or your studio — every Tonewood case is a one-of-a-kind statement piece. Built for players who want their tone to look as good as it sounds.
Other solid wood species available on request. Ask us what we can source.
Solid Pine Construction
Not plywood wrapped in vinyl. Solid pine throughout — furniture-grade, kiln-dried, and built to the same structural standard as every Casesmith case. Other solid wood species available on request.
Custom Stain Finishes
Dark Walnut, Cherry, Ebony, Golden Oak, Mahogany — or a custom color matched to your rig. Every stain is hand-applied to bring out the natural grain character of the wood, not cover it up.
Protective Topcoat Seal
A durable clear topcoat locks in the stain and protects the wood from road wear, humidity, and stage abuse — keeping it looking sharp whether it lives in the studio or tours with you every night.
Precision Joinery & Smooth-Edge Chamfers
Every joint is cut and fit with the care you'd expect from a piece of fine furniture. Smooth chamfered edges add visual refinement and eliminate sharp corners — a detail that separates boutique craft from box-store builds.
Pro Hardware — Your Way
Rack rails, handles, and corner hardware in black, nickel, or custom finish. The natural wood grain pairs with any hardware tone — warm brass, clean nickel, or blacked-out for contrast.
Any Size. Any Depth.
Multiple rack sizes and depths available. Standard builds or fully custom — we build to your specs, not whatever's easiest to cut in bulk.
Handcrafted in the USA
Every Tonewood case is built one at a time by skilled woodworkers. The joinery, the stain, the topcoat, the hardware fit — all done by hand, in our shop, to your exact specifications.
Want a stain matched to your guitar or amp?
Custom stain colors, alternate wood species, hardware finishes, rack counts, and depths — if you can spec it, we can build it. Reach out and we'll quote you straight. No upsells, no runaround.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Your order is processed safely through PayPal-powered checkout.
PayPalVISAMCAMEX
No PayPal account required for card checkout.
Customer Notes
“I just got the rack box you built for my Kemper rack in green with the side leather handle. All I can say is I am blown away!! What a beautiful job you did!! It is stunning.” — Bill Ruppert
“I cannot find a good flight case anywhere online for them… the one I could find is plastic and generic looking, very cheap looking!” — Custom keyboard case customer
“This case is absolutely stunning!!!!! Built so well! I couldn't be more pleased with the way it turned out. Thank you so much for your hard work and attention to detail!” — Erik H.
